“SHURE” Longitudinal tear switch

“SHURE” Longitudinal tear switch

Tear switch handle reset type:
Introduction:

● When the conveyor belt is torn, punctured, damaged at the hinge or sharp objects protrude from the belt, the tear switch can provide an interlock alarm signal to the monitoring personnel or shut down the conveyor , Minimize the damage to the conveyor belt.

● Longitudinal anti-tear switch is an indispensable protection device in the safe operation of the conveying system, and it is widely used in steel plants, thermal power plants, cement plants, chemical plants, ports, etc.
Working principle
The tear switch is installed in pairs on both sides of the conveyor belt, and is connected by two sections of aviation steel wire rope with vinyl jacket. One section of the aviation steel wire rope is fixed on the support bracket, and the other end is linked to the pull ring of the tear switch. The two sections of aviation steel wire rope form a monitoring surface under the conveyor belt. When objects or torn belts are suspended, one or
two When an aviation steel wire rope is used, the aviation steel wire rope pulls the pull ring of the tear switch to make it move, and the tear switch sends out an alarm signal or a shutdown signal.
Applications